A) MIB
B) SNMP Agent
C) Syslog server
D) SNMP Manager
E) Set
A) Netflow
B) WCCP
C) IP SLA
D) SNMP
A) 0000.0C07.AC01
B) 0000.5E00.0110
C) 0007.B400.1203
D) 0000.C007.0201
A) SET
B) TRAP
C) GET
D) INFORM
A) Message Integrity
B) Compression C) Authentication D) Encryption E) Error Detection
C) Authentication
D) Encryption
E) Error Detection
A) AVF
B) AVG
C) Active Router
D) Standby Router
A) The active virtual gateway will reply with one of four possible virtual MAC addresses.
B) All GLBP member routers will reply in round-robin fashion
C) The active virtual gateway will reply with its own hardware MAC address.
D) The GLBP member routers will reply with one of four possible burned in hardware addess.
A) It monitors traffic flow and link utilization
B) it ensures the best VRRP router is the virtual router master for the group
C) it causes traffic to dynamically move to higher bandwidth links.
D) it thwarts man-in-the-middle attacks.
A) GLBP supports up to eight virtual forwarders per GLBP group.
B) GLBP supports clear text and MD5 password authentication between GLBP group members.
C) GLBP is an open source standardized protocol that can be used with multiple vendors.
D) GLBP supports upto 1024 virtual routers.
E) GLBP can load share traffic across a maximum of four routers.
F) GLBP elects two AVG's and two standby AVG's for redundancy.
A) The virtual IP address and virtual MA+K44C address are active on the HSRP Master router.
B) The HSRP default timers are a 3 second hello interval and a 10 second dead interval.
C) HSRP supports only clear-tesxt authentication
D) The HSRP virtual IP address must be on a different subnet than the router's interfaces on the same LAN.
E) The HSRP virtual IP address must be the same as one of the router's interface addreses on the LAN
F) HSRP supports upto 255 groups per interface, enabling an administrative form of load balancing.
A) SNMPv3 enhanced SNMPv2 security features.
B) SNMPv3 added the inform protocol message to SNMP
C) SNMPv2 added the inform protocol message to SNMP.
D) SNMPv3 added the GetBulk protocol message to SNMP
E) SNMPv2 added the GetBulk protocol message to SNMP.
F) SNMPv3 added the GetNext protocol message to SNMP
No comments:
Post a Comment